EVOLUTION QS816 V(G)

Hoist rope

EVOLUTION QS816 V(G) is a high performance hoist rope from TEUFELBERGER which impresses with its high breaking forces and its radial stability.

Specifications

  • Breaking force: +++++          
  • Bending fatigue behavior: ++++
  • Radial stability: +++++        
  • Low torsional tendency: +++   
  • Low elongation: ++++         
  • Multilayer spooling: +++++
  • Constructions:
    • 16–42 mm: 8 x K26W S –EPIWRC (K)
    • 44–50 mm: 8 x K31WS–EPIWRC (K)
    • 52–70 mm: 8 x K42WS–EPIWRC (K)
  • Variants: ordinary lay or Lang’s lay, right or left lay, galvanized and bright
  • Certifications: DIN 21254 and EN12385-6; other certificates gladly provided on request
  • SUPERFILL®
  • PLASTFILL®

EVOLUTION QS816 V(G) is extremely resistant to adverse external influences. The rope impresses with its optimum combination of high breaking force, high radial stability, relatively low elongation and high flexibility. Our EVOLUTION QS816 V(G) can be employed in many different ways and is thus suited as hoist rope in the following applications:

  • Drum applications in single and multilayer spooling
  • Friction hoists


Of course, EVOLUTION QS816 V(G) from TEUFELBERGER can be individually adapted to your respective requirements to thus optimally balance the design in terms of wear, service life, breaking load, etc.
 

The benefits of EVOLUTION QS816 V(G) are:

  • Outer strands compacted by means of SUPERFILL® technology making the rope extremely resistant to wear and plastic deformation
  • Excellent spooling characteristics due to highest dimensional stability under lateral pressure - even in multilayer spooling use
  • High flexibility and longevity in terms of bending cycles
  • Extremely high resistance to external environmental influences and the ingress of dirt due to PLASTFILL® insert resulting in a perfect lubrication of the inner rope
  • Supreme operational safety due to high breaking forces
  • Resistance to dynamic loads due to the special construction of the inner rope
  • Relatively low rope elongation 
Diameter
[mm]
Diameter
[inch]
Weight
[kg/m]
Weight
[lbs/ft]
Minimum breaking force at a tensile strength of 1770 N/mm²
[kN]
Minimum breaking force at a tensile strength of 1770 N/mm²
[lbs]
Minimum breaking force at a tensile strength of 1960 N/mm²
[kN]
Minimum breaking force at a tensile strength of 1960 N/mm²
[lbs]
16 5/8 1.20 0.81 210 47,210 232 52,156
17 1.35 0.91 235 52,830 261 58,675
18 1.55 1.04 263 59,125 291 65,419
19 3/4 1.71 1.15 302 67,892 335 75,311
20 1.89 1.27 330 74,187 365 82,055
21 2.15 1.44 374 84,079 414 93,071
22 7/8 2.34 1.57 408 91,722 451 101,389
23 2.54 1.70 445 100,040 492 110,606
24 2.75 1.85 467 104,986 517 116,226
25 1.00 2.97 1.99 518 116,451 574 129,040
26 3.19 2.14 555 124,769 615 138,257
27 3.51 2.36 595 133,761 659 148,149
28 3.76 2.52 656 147,475 726 163,211
28.57 1 1/8 4.04 2.71 672 151,072 745 167,483
29 3.98 2.67 694 156,017 768 172,653
30 4.37 2.93 764 171,754 846 190,188
32 1 1/4 4.90 3.29 864 194,235 957 215,142
34 5.59 3.75 945 212,444 1,046 235,150
36 6.36 4.27 1,071 240,770 1,186 266,623
38 1 1/2 7.03 4.72 1,222 274,717 1,354 304,391
40 7.81 5.24 1,342 301,694 1,486 334,066
42 8.60 5.77 1,482 333,167 1,641 368,911
44 9.27 6.22 1,596 358,795 1,768 397,462
46 10.30 6.91 1,760 395,664 1,949 438,153
48 10.78 7.23 1,848 415,447 2,050 460,858
50 2 11.60 7.78 2,016 453,215 2,232 501,774
52 12.50 8.39 2,180 490,083 2,414 542,689
54 2 1/8 13.91 9.33 2,287 514,138 2,532 569,216
56 14.50 9.73 2,529 568,542 2,800 629,465
58 15.60 10.47 2,712 609,682 3,004 675,326
60 2 3/8 16.70 11.21 2,903 652,620 3,214 722,536
62 17.80 11.94 3,099 696,683 3,432 771,544
64 19.74 13.25 3,303 742,544 3,657 822,126
66 20.63 13.84 3,495 785,707 3,870 870,011
68 21.40 14.36 3,728 838,088 4,128 928,011
70 22.70 15.23 3,951 888,220 4,375 983,539
Typing errors and technical changes reserved. The data are typical values without warranty or guarantee. For questions we are always at your disposal.